Panasonic DMR-E20 Operating Instructions Manual page 14

u)
O)
Preparation
=,Refer to the television's operating instructions.
eTum the television off and disconnect its AC power supply cord.
Audio/Video sable (inctuded)
Yellow (VIDEO)_ ,,
White('l
Red (R) _
This unit
Television
Audio/Video cable (included)
VIDEO
IN IN
0 @ @
RF IN
75 Q coaxial --
cable (included)
\
To the antenna
Cable TV
Outdoor antenna
Indoor antenna
or
J
Antenna cable
disconnected from the
television
elf the antenna cable you
disconnected from your
television is not a coaxial
cable with a plug, you will
need to obtain a plug and
rework the cable
(,,o page 80).
Cooling fan
I To household AC outlet
(AC 120 V, 60 Hz)
AC power supply cord
(included)
Conserving power
This unit consumes a small amount of power, even when it is turned
off (approx, 5 W ). To save power when the unit is not to be used for
a long time, unplug it from the household AG outlet.
• When you have finished connecting the unit
Change the unit's settings to suit your television's aspect ratio
(-, "Selecting TV screen type", page 21). You do not have to change
this setting if you have a television with a regular 4:3 aspect.
•
Upgrading your system
TO enjoy CATV broadcasts
See "Expanding your home theater system" on page 75.
(A contract with a cable TV company is required in most cases to
view these broadcasts.)
To enjoy sound through other audio equipment
You can output digital signals from this unit's DIGITAL AUDIO OUT
terminal, enabling you to enjoy the powerful surround effects found
on discs recorded with Dolby Digital or DTS. Connect an amplifier
with built-in decoders. See page 78 for connection examples.
in
RQT6035