Panasonic DMR-E20 Operating Instructions Manual page 80

!
Check the type of antenna input on your television and make the
appropriate connection.
• If it is a twin lead
300-75/_ transformer
(not included)
from the antenna
(Flat)
Twin lead
300 _ cable
To this unit's
RF IN termina
• If there is a twin lead and a coaxial cable
from the antenna
(Flat)
Twin lead
300 Q cable
VHF/UHF band mixer
(not included)
(Round)
75 _ coaxial cable
To this unit's
RF IN terminal
• If there are two twin leads
from the antenna
VHF/UHF band mixer
(not included)
To this unit's
RF IN terminal
elf your television has both post and plug-type VHF
terminals, the post connection is recommended to
minimize signa_ loss.
Use the connection that suits the type of terminal.
F• If it is a screw & plug type terminal
Television
VHF/UHF band separator I _'11
,no,
75 _ coaxial cable
• If it is a screw type terminal
Television
75-300 _ transformer
(not included)
• If it is a double screw type terminal
VHF/UHF band separator
(not included)
Television
• If it is a complex TV terminal
ANT 2
• Connect to one of the ANT terminals and select the same
antenna number on the television.
_ J _ J
T6035