Panasonic DMR-E20 Operating Instructions Manual page 13

_, ^, V,CH .......... ....
, +, --,VOL
2
[]
r_y
DVD
POWER(._) _ <_ (_
Q2) @ Q2_
r IB" ,
POWER(_) CH VOL
TV/AV
Q_ <!2_ Q_
_ C!2_ c2_
Q2_ Q2_ _
You can control televisions by entering the remote control code.
Preparation
eTurn on the television• I
=
oSwitch [DVD, TV] to "TV".
1
Refer to the chart below for the code
2
"O
for your television. _:
Press and hold [r_l, POWER (_] and
enter the two-digit code with the num-
bered buttons.
•For example: 01, press [01 ,,o [1]. f,_
QPoint the remote control at the television.
eAfter entering the code, test the remote control by turning
on the television and changing channels•
elf there is more than one code, repeat the procedure until you find
the code that allows correct operation.
elf your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
oThis remote control works with most recently manufactured televi-
sions, but may not be able to control all the functions on older mod-
els. Use the remote control supplied with your television if this is
the case.
Code No. Manufacturer
01 Panasonic/National QUASAR
02 Panasonic/National QUASAR
03 MAGNAVOX SYLVANIA PHILIPS (RC-5)
04 ZENITH
05 THOMSON RCA GE
06 SHARP
07 SHARP
08 SONY
09 TOSHIBA
10 SANYO FISHER
11 JVC
12 HITACHI
13 MITSUBISHI
14 SAMSUNG
15 GOLDSTAR/LG
16 GOLDSTAR/LG
17 GOLDSTAR/LG
18 SAMSUNG
• Operation []
Operation Button
On and off [r_i, POWER _]
Video input mode [1_, TV/AV]
Channels [i_, A, V, CH]
Numbered buttons (=_page 8)
Volume [_i_, +, -, VOL]
ROT6035