Panasonic DMR-E20 Operating Instructions Manual page 23

Dvd video recorder
Table of Contents

Advertisement

TOP MENU'
bu.ons
LAST
MARKER
t
[]
STOP
%
pLAY
When
a menu
screen
appears
on the
/
3
television
J
_
Kr_ra
Operate menus with the following operations. Actual operations de-
pend on the disc,
Press the numbered
buttons to select an item (= page 8), or
move the joystick
[&,
V,
<1, I_] to select an item and press
[ENTER].
eYou can return to menus after you start play by _
I
pressing [TOP MENU] or [MENU] (DVD*Video),
I
or [RETURN}
(Video CD).
oDiscs continue
to
rotate
while menus
are displayed.
Press
[I,
STOP] when you have finished viewing to preserve the unit's
motor and your television screen.
oVolume may be lower when playing DVD-VIdeo than when playing
other discs or during television broadcasts.
If you turn the volume up on the television or amplifier, ensure you
reduce the volume again before playing other sources or returning
to the television
so that a sudden increase in output does not
occur,
For your reference
=If "Q" appears on the television
The operation is prohibited by the unit or disc.
elf a disc is loaded, the unit will come on and play will start when
you press [1_, PLAY}.
elf you play a disc with video and then replace it with an audio-only
disc, the video from the previous disc may continue to be shown
on the television.
I
1
During
play
Press [i,
STOP].
The unit remembers
the position.
2
Press
[,,
PLAY]
while
"PLAY"
is
flashing
on the display.
Play starts from where you stopped it.
• To cancel the resume function
Press [i,
STOP] until "PLAY" goes out.
(The position is also cleared when you turn the unit off.)
• To start play from a memorized
position after
turning the unit off
Press ]LAST MARKER] during play.
(The message "Position Memorized" appears on the television.)
Now when you press [1_, PLAY] after switching the unit to standby
and back on, play starts from the memorized position.
For your reference
elf you press [I,
STOP} before switching the unit to standby after
pressing [LAST
MARKER]
to memorize
a position, play will
resume from the position you pressed [I
STOP] when you press
[1_, PLAY].
oThe position
memorized
when you press [i,
STOP) is cleared
when you switch the unit to standby or if the unit switches to stand-
by automatically
(.o page 82, ACTION--Set
Up--Off
Timer).
oThe position
is memorized
when
you
press
[i,
STOP]
or
[LAST MARKER] and cleared when you open the disc tray.
eThe last marker is written to the disc and remains intact until you
mark a different position.
You cannot mark positions
if the disc is write-protected
with DISC
SETTING (.o page 52) or with the write-protect tab (.o page 99).
Release the protection before marking another position.

Advertisement

Table of Contents
loading

Table of Contents