Service And Maintenance - CDI CD52 Bandit User Manual

CD52 Bandit (ATEX-IECEx and UKCA Certification) User Guide
SERVICE & MAINTENANCE
Care and Maintenance
Equipment designed by CDI is protected against the environment in
which it is intended to operate. Much of the equipment is designed
for prolonged use in the field without any special maintenance other
than routine battery replacements. It is the Purchaser's responsibility
to insure that proper precautions are taken during installation and
operation so that weather seals are in place, routine maintenance
occurs, etc. Failure to perform these operations nullifies this warranty.
CDI equipment should only be operated by qualified personnel
who are familiar with any and all manuals and procedures for said
equipment's operation.
Operating equipment while in a damaged condition nullifies this
warranty.
Service and Repairs
Cost for repairs not covered by the warranty or carried out after the
warranty period has expired will be charged at the current hourly or
set service rate, plus the cost of materials, upon approval by Purchaser.
Equipment for repair must be sent at the Purchaser's expense and be
accompanied by the Purchaser's written order describing the defect
and authorizing CDI to invoice the Purchaser for labor, materials and
return delivery cost.
No service or repair will be undertaken until an approved written order
is received from the Purchaser.
Operating equipment while in a damaged condition nullifies this
warranty.
Page 40 of 52