Table of Contents
Advertisement
OPTIONAL EQUIPMENT
Remote Indicator System (RIS)
The RIS consists of four high-luminosity LEDs
that, when pig passage occurs, can be seen over
distances as great as 100 meters [328 ft].
The RIS may be added to any Bandit System.
Pipeline Banding Kits
Type 201 or 316 stainless steel banding and band
installation tool can mount conventional
or stainless steel Bandit antennas to any pipeline.
As an alternative, nylon straps with type 304
stainless steel ratchets provide quick
installation/removal.
Cathodic Protection Base Mounting
Cathodic protection insulation matting is available
to protect pipeline coating and to provide
electrical isolation between the pipeline
and CD52 Bandit.
Heater
A 24 VDC internal heater is recommended for operation in temperatures
below –30°C [–22°F].
Heat Risers
Heat riser insulators for the CD52 Bandit allow
the system to be used on geothermal pipelines
or other environments where pipeline surface
temperatures exceed 80°C [176°F].
NOTE: Heat risers enable the CD52 Bandit to operate with pipeline
temperatures greater than 80°C [176°F]. However, if the ambient air
environment of the system is greater than 70°C [158°F], it will be operating
outside of ATEX/IECEx Certification.
CD52 Bandit (ATEX-IECEx and UKCA Certification) User Guide
Page 37 of 52
OPTIONAL EQUIPMENT
Advertisement
Table of Contents
