CDI CD52 Bandit User Manual page 27

CD52 Bandit (ATEX-IECEx and UKCA Certification) User Guide
SETUP AND OPERATION
Any time the Bandit's lever is activated, the "BTN" display segment will
confirm contact.
To ensure Bandit's availability under adverse
conditions (wind, icing, vandalism, etc.) that
could move the lever into the engaged position
while unattended, the unit will automatically
override the lever setting after one minute and
45 seconds, and automatically return to normal
operation.
Real-time Display
The primary purpose of the real-time display is to allow an operator to
quickly and easily confirm the clock is set to the correct time.
(See pg. 31 for instructions on setting the clock.)
The real-time display has the following characteristics:
Page 27 of 52