CDI CD52 Bandit User Manual page 23

The User Interface
The Bandit's user interface display contains much information for an
operator, yet is quite simple and easy to read.
ACTIVE
FUNCTION
INDICATORS
RECENT
PASSAGE
INDICATOR
This display automatically cycles between showing the most recent pig
passage time, date and the actual real-time every seven (7) seconds.
This allows the operator to approach the Bandit on site and see
the most recent pig passage time and verify the internal clock is set
correctly – all without touching the unit.
Passage Time / Current Time
is displayed, the colon will blink (momentarily appear) and the "TIME"
Active Function Indicator segment will display.
When the most recent pig passage time is displayed, the colon display
will be constant (non-blinking) and the "TIME" Active Function
Indicator segment will not display.
Passage Date / Current Date
These segments normally alternate between displaying
the real-time date and the date of the most recent pig
passage. This date is in American format (MONTH–DATE;
the year is not displayed). Therefore, 4–05 would be April 5th, with the
year assumed to be current year.
CD52 Bandit (ATEX-IECEx and UKCA Certification) User Guide
PASSAGE
INDICATOR
MARKED
These display segments normally alternate between
showing the most recent pig passage and the actual
PASSAGE TIME
/CURRENT TIME
real-time as known by the unit. When the real-time
PASSAGE DATE
/CURRENT DATE
PASSAGE
INDICATOR
MARKED
PASSAGE TIME
/CURRENT TIME
PASSAGE DATE
/CURRENT DATE
PASSAGE
INDICATOR
MARKED
Page 23 of 52
SETUP AND OPERATION
PASSAGE TIME
/CURRENT TIME
PASSAGE DATE
/CURRENT DATE