CDI CD52 Bandit User Manual page 30

SETUP AND OPERATION
Clearing the "Recent Passage" Flag
you may wish to manually terminate the blinking cycle (for example,
when the Bandit is used in a portable application or on a launcher
or receiver). To clear the recent passage display, rotate the Interface
Lever into the "activated" position (see pg. 27) and hold it there for a
period of four (4) seconds. Once cleared, release the lever to return
the unit to normal operation.
Removing the "Recent Passage" message from the screen will not
affect anything in memory. The most recent pig passage time and date
will cycle every few seconds.
Setting the Clock
Occasionally it will be necessary to set the unit's real-time clock (see
note.) To do so, hold the lever in the activate position for a period of
eight (8) seconds. After eight seconds you will see the majority of the
Bandit's display go blank. Release the lever, and then briefly press and
release it one time. You should then see a display similar to this:
NOTE: the unit
calendar does
not automatically
compensate for a
leap year, so it will be
necessary to re-set the
unit every February 29 to
ensure accuracy.
CD52 Bandit (ATEX-IECEx and UKCA Certification) User Guide
The Recent Passage LCD segment will blink
for one hour after a pig passage then remain
on for an additional 11 hours. However,
Page 30 of 52