Raycus RFL-C Series User Manual page 9

Table 3: The Operation Environment Conditions for the Laser
Model
Power Source
Power Capacity
Installation Environment
Ambient Temperature ( )
Relative Humidity
Warning:
1) Make sure the product is properly grounded before use.
2) The laser output head is connected with fiber optic cable. Please inspect the
output head carefully for prevent dust or other pollution. Use appropriate
lens paper to clean it if necessary.
3) Failure to follow the instructions when operating the laser may cause
malfunction and damage.
4) It is not allowed to install the output head when the laser is in operation.
5) Do not look into the output head directly. Wear appropriate protective eye
glasses all the time when operating the laser
 Do not expose this product to high humidity (humidity> 95%).
 Do not allow this product to operate at a temperature below
Wuhan Raycus Fiber Laser Technologies Co., Ltd
kW
the ambient dew point. (As shown in Table 4)
User Guide of Global Version 2000 W CW laser
RFL-C2000S-CE/RFL-C2000H-CE
220±10% V AC
50/60Hz
Flat and no vibration
10~40
Raycus User Guide | Product Description
6.0
＜70
9
6