The Mode Selection Function - Raycus RFL-C Series User Manual

4.7.6 The Mode Selection function

Select the operating mode of the software, including monitor mode, control
mode, diagnostic mode, and debug mode.
Monitor mode: The monitor mode is selected by default when the software
is opened. The most commonly used and concerned information is displayed on
the software interface to avoid the interference of too much information to the user.
The monitor mode can be used without password.
Control mode:
interface on the basis of the observation mode, and the password is required to
enter the control mode.
Debug mode: On the basis of diagnostic mode, the parameter setting interface
is added. Only Raycus debug engineers can enter the encryption mode.
Diagnostic mode: When a laser fails to diagnose remote after - sales, or the
integrated dealer needs to understand more status information of the laser, you can
enter the diagnostic mode.
Wuhan Raycus Fiber Laser Technologies Co., Ltd
Figure 15 Authorization interface
The control mode adds the function of the operable control
User Guide of Global Version 2000 W CW laser
Raycus User Guide | Using the Product
33
30