Interface Definition; Control Interface - Raycus RFL-C Series User Manual

Model
Power
supply
Power cord
Power cord
Three strands, marked L, N and PE respectively
end
L->Phase line (brown)
Label
N ->Neutral (blue)
description
PE->Protective earth wire (yellow green)
Insert the plug at the end of the power cord into the socket marked "AC INPUT"
on the rear panel. Note that the plug has anti-reverse connection function. After
Note
plugging it in, lock it with a lock.

4.4 Interface definition

4.4.1 Control interface

Figure 6 shows the DB25 control interface diagram:
The pin definitions of DB25 are as follows:
Wuhan Raycus Fiber Laser Technologies Co., Ltd
Table 7 Power connection requirements
RFL-C2000S-CE/RFL-C2000H-CE
220±10% V AC
Figure 6 DB25 control interface
User Guide of Global Version 2000 W CW laser
50/60Hz
Raycus User Guide | Using the Product
21
18