Table of Contents
Advertisement
The following I.C. Medical's accessories are compatible, and
need to be use with your CRYSTAL VISION
inspect them for any sign of damage:
1. ESU Sensor
2. RF Sensor, Shielded
3. UNIVERSAL BLUE™ RF Sensor
4. Laser Sensor
5. Foot Switch
6. SAFEGUARD BLUE® Hydrophobic ULPA Filter with
Built-in Fluid Trap
7. Large Coconut Charcoal Output Filter
The power cords for smoke evacuator units should be
grounded, medical-grade type
For a complete list of compatible finish product reference
number, please contact I.C. Medical, Inc.
CAUTIONS: Use only smoke evacuator accessories
manufactured by I.C. Medical, Inc. as SAFEGUARD
BLUE
®
Hydrophobic ULPA Filter with Built-in Fluid
Trap, Large Coconut Charcoal Output Filter, RF Sensor(s),
smoke tubing disposable and other accessories.
Using any other filters, sensors, or accessory, not
manufactured or supplied by I.C. Medical, Inc. may cause
damage and/or cause the system to be inoperable and may
void the warranty.
FILTERS and POWER CORD
INSTALLATION:
1. Attach the Large Coconut Charcoal Output Filter to the
connector on the back of the CRYSTAL VISION
2. Attach the SAFEGUARD BLUE
Filter with Built-in Fluid Trap to the connector on the front
of the CRYSTAL VISION
3. Attach the power cord to the CRYSTAL VISION
4. Refer to Figure 1.
®
, be sure to
®.
®
Hydrophobic ULPA
®
.
®
.
Figure 1: Filters and Power Cord Installation
4
Advertisement
Table of Contents
