Grizzly G0638HEP Manual page 20

Inventory
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
After all the parts have been removed from the
boxes, you should have the following items:
Inventory (Figures 1–5):
A. Upper Stand Braces ................................... 4
B. Upper Stand Legs ...................................... 4
C. Filter Adapter .............................................. 2
D. Control Box Bracket ................................... 1
E. Cyclone Mounting Brackets ....................... 4
F. Lower Stand Legs ...................................... 4
G. HEPA Filter Support Leg (3 Pieces) .......... 1
H. Lower Stand Braces ................................... 4
A
B
E
D
H
Figure 1. Inventory items A–H.
-4-
Qty
C
F
G
I.
Intake Cylinder ........................................... 1
J.
Outlet Port .................................................. 1
K. Cyclone Funnel (Large) .............................. 1
L.
Intake Barrel ............................................... 1
M. Cyclone Funnel (Small) .............................. 1
N. Funnel Port ................................................. 1
J
I
L
Figure 2. Inventory items I–N.
O. Blower Housing with Motor ........................ 1
P. Control Box ................................................. 1
Q. Remote Control .......................................... 1
R. Collection Drum Lid Latches ...................... 6
S. Casters 2" ................................................... 8
T. Collection Drum Lids .................................. 2
U. Upper Collection Drum Cylinders ............... 2
V. Collection Drum Clamps ............................ 2
W. Lower Collection Drum Cylinders ............... 2
O
P
Q
R
S
Figure 3. Inventory items O–W.
Model G0442HEP/G0601HEP (Mfd. Since 01/15) Model G0638HEP (Mfd. Since 01/15)
M
N
K
T
U
V
W