Grizzly G0638HEP Manual page 11

28. Attach HEPA support leg assembly to outlet
(see Figure 25) using (4)
bolts, (8) ⁄ " flat washers, and (4)
3
8
nuts. Then adjust foot until it touches floor.
Figure 25. HEPA support leg attached to outlet.
29. Attach each filter adapter to top of each filter
assembly with (8)
⁄ " flat washers, and (1) outlet flange gasket
5
16
(see Figure 27).
Filter Adapter
Figure 26. Attaching filter adapter to filter
assembly (1 of 2 shown).
Model G0638HEP (Mfd. Since 7/20)
⁄ "-16 x 1" hex
3
8
⁄ "-16 lock
3
8
Outlet
x 4
HEPA
Support Leg
⁄ "-18 x 1" hex bolts, (8)
5
16
x 8
Gasket
Filter Assembly
30. Place outlet square gasket on open end of
a filter adapter (see Figure 27), then secure
filter adapter to outlet with (8)
bolts, (16) ⁄ " flat washers, and (8)
3
8
nuts.
Figure 27. Filter components assembled.
31. Repeat Step 30 with second filter assembly.
32. Apply 460mm diameter barrel gasket to
larger, top end of small cyclone funnel.
33. Attach small cyclone funnel to bottom of large
cyclone funnel with (9)
bolts, (18) ⁄ " flat washers, and (9)
5
16
hex nuts (see Figure 28).
x 9
Small
Cyclone
Funnel
Figure 28. Small cyclone funnel and funnel port
attached.
⁄ "-16 x 1" hex
3
8
⁄ "-16 lock
3
8
Outlet
Rubber
Gasket
Filter Adapter
⁄ "-18 x 1 ⁄ " hex
5 1
16 4
⁄ "-18
5
16
Large
Cyclone
Funnel
-11-