Page 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
We want your feedback on this manual. What did you like about it? Where could it be improved? Please take a few minutes to give us feedback. Grizzly Documentation Manager Manufacture Date P.O. Box 2069 Bellingham, WA 98227-2069 Email: manuals@grizzly.com Serial Number Model G0671/G0672/G0673 (Mfd. Since 6/17)
Identification Upper Bag Hanger Assembly Upper Bag Inlet ON/OFF Power Switch Collector Motor (Hidden From View) Collection Bag Base Caster To reduce your risk of serious injury, read this entire manual BEFORE using machine. Model G0671/G0672/G0673 (Mfd. Since 6/17)
The information contained herein is deemed accurate as of 11/27/2017 and represents our most recent product specifications. Model G0671 PAGE 1 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model G0671/G0672/G0673 (Mfd. Since 6/17)
Page 7
The information contained herein is deemed accurate as of 11/27/2017 and represents our most recent product specifications. Model G0671 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model G0671/G0672/G0673 (Mfd. Since 6/17)
Page 8
13.2 13.5 (Inch/H2O) Ø10" Ø10" Amps 29.5 27.5 16.8 12.5 " Air Speed (m/s) 32.1 30.5 27.1 19.5 13.5 " Test run using 30 micron upper and lower bag. Page 3 of 3 Model G0671 Model G0671/G0672/G0673 (Mfd. Since 6/17)
MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0672 5 HP INDUSTRIAL DUST COLLECTOR Product Dimensions: Weight................................286 lbs. Width (side-to-side) x Depth (front-to-back) x Height................. 74 x 29 x 134 in.
Page 10
The information contained herein is deemed accurate as of 11/27/2017 and represents our most recent product specifications. Model G0672 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model G0671/G0672/G0673 (Mfd. Since 6/17)
Page 11
25.5 20.5 14.5 10.6 " Test run using 2.5 micron upper bag and plastic lower collection bag. Max amp draw after adding 10" x 4" x 4 inlet: 30.3A. Model G0672 Page 3 of 3 Model G0671/G0672/G0673 (Mfd. Since 6/17)
The information contained herein is deemed accurate as of 11/27/2017 and represents our most recent product specifications. Model G0673 PAGE 1 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. -10- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Page 13
The information contained herein is deemed accurate as of 11/27/2017 and represents our most recent product specifications. Model G0673 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. -11- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Page 14
39.3 31.5 24.2 15.6 Test run using 2.5 micron upper bag and plastic lower collection bag. Max amp draw after adding 10" x 4" x 5 inlet: 30.5A. Model G0673 Page 3 of 3 -12- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Everyday ery. Never operate under the influence of drugs or eyeglasses are NOT approved safety glasses. alcohol, when tired, or when distracted. -13- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Page 16
EXPERIENCING DIFFICULTIES. If at any time debris. Make sure they are properly installed, you experience difficulties performing the intend- undamaged, and working correctly BEFORE ed operation, stop using the machine! Contact our operating machine. Technical Support at (570) 546-9663. -14- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Make sure you know be exposed to rain or moisture, which creates a what type of wood dust you will be exposed to in shock hazard and will reduce life of machine. case of an allergic reaction. -15- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Full-Load Current Rating at 220V ..30 Amps sult an electrician or qualified service personnel to ensure circuit is properly sized for safe operation. Full-Load Current Rating at 440V ..15 Amps -16- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Power Supply Circuit ......40 Amps performed by an electrician in accordance with all applicable electrical codes and ordinances. G0672 Circuit Requirements for 220V This machine is prewired to operate on a power Locking supply circuit that has a verified ground and meets...
#P0673036) for this procedure can be purchased any changes to the motor shipped with your by calling Grizzly Customer Service at (800) 523- machine. 4777. All wiring changes must be performed by an elec- trician or qualified service personnel before the machine is connected to the power source.
Grizzly or the shipping agent. You MUST have the original pack- aging to file a freight claim. It is also extremely helpful if you need to return your machine later.
Figure 3. G0671/G0672 Inventory 1. NOTICE If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials.
Shadows, glare, or strobe effects that may distract access restricted location. or impede the operator must be eliminated. ⁄ " ⁄ " G0671/G0672 ⁄ " ⁄ " G0673 Figure 1. Model G0671-3 illustrated top view and suggested clearances. -22- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Figure 9. Fully tighten the bolts and the hard- ware from Step 2. ⁄ "-18 Hex Nut ⁄ "-18 x 1" Hex Bolt Rubber Gasket Leg Brace Figure 11. Collector mounted to impeller housing. Figure 9. Attaching leg braces. -23- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Page 26
Figure 14. machine is wired in phase, then proceed to Step 7. Hanger The Models G0671 and G0672 are single Assembly phase and cannot be wired out of phase. For these models, continue below. Attach the inlet to the top of the impeller housing with the #10-24 x 3/8"...
Page 27
Then, proceed to Test Run Bag Clamp on Page 26. Figure 18. Lower collection bag secured to — Model G0672-73: Slip the lower plastic collector. collection bag over the bottom lip of the col- lector and position the bag evenly around 19.
Make sure all tools and objects used during setup are cleared away from the machine. Connect the machine to the power source. Turn the machine ON by pushing in the GREEN button on the power switch. -26- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Additionally, Grizzly offers a complete guide book titled Dust Collection Basics. A 4-port inlet is included with the Model G0671/ G0672 and a 5-port inlet is included with the Model G0673 for quick and economical dust col- lection setup. However, depending upon your...
Grizzly offers polyethylene hose, to seal all the seams with silicone and screw the which is well suited for the removal of particulate components on the ends with sheet metal screws.
Line Duct Our Workshop Planner will allow you to quickly and easily draw and print a basic shop layout. Don't worry, non-Grizzly brand machines can be substituted with Grizzly machines for layout pur- Figure 23. Good duct layout. poses. Note: After you're finished, make sure to save your layout for later modification.
Page 32
2" 2.5" 3" 4" 5" 6" 7" 1203 8" 1570 9" 1990 Figure 27. CFM requirements labeled for each machine. 10" 2456 Figure 25. Approximate required airflow for machines, based on dust port size. -30- Model G0671/G0672/G0673 (Mfd. Since 6/17)
4“ 4“ 5“ branches open at one time. For the Model G0671/G0672/G0673 this is 10". Mark your drawing, as in Figure 28. Figure 29. Branch line sizes labeled on sketch. Multiple Dust Ports If your machine has multiple dust ports, add the total CFM given for each dust port size from Figure 25.
Page 35
5) reducing 90˚ elbows or replacing them Model G0671 with 45˚ elbows The 3550 CFM (Figure 34) for the static pres- sure loss of the line connected to the router is well above the 220 CFM requirement of that machine. -33- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Figure 36. Ensure that each machine is continu- by grounding all dust ously grounded to the grounding terminal in your collection lines. electric service panel. -34- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Regardless of the content in this sec- efficiency throughout the system. tion, Grizzly Industrial will not be held liable for accidents caused by lack of training. DO NOT use the dust collector for any other purpose besides collecting dust from connected woodworking machines.
(10) pipe clamps, (2) pipe hangers, (2) 5' straight To reduce this risk, only install accessories pipes, (2) adjustable nipples, (1) branch, and (1) recommended for this machine by Grizzly. 60˚ elbow. NOTICE Refer to our website or latest catalog for additional recommended accessories.
Page 39
We carry many different branches, all designed 4"–8" with 90˚, 60˚, 45˚, or 30˚ curves. Also, avail- to minimize airflow resistance. able with a 90˚ long radius curve. Call (800) 523- 4777 or visit www.grizzly.com for more informa- tion and pricing. 90° 90° Long Radius Figure 43.
Page 40
" hood adjusts from 23" to 43" high. Every your work area tidy and clean. shop needs one of these! T10117 Figure 48. T10117 Big Mouth Dust Hood. Figure 46. T10115 Benchtop Downdraft Table. www.grizzly.com 1-800-523-4777 order online at or call -38- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Motor fan is rubbing on fan cover. Replace dented fan cover; replace loose/damaged fan. Motor mount loose/broken. Tighten/replace. Motor bearings are at fault. Test by rotating shaft; rotational grinding/loose shaft requires bearing replacement. Centrifugal switch. Replace. -40- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Page 43
Reclamp the dust collection bag and air filter bag, into the air from the dust bag, or filter bag is not properly making sure bag clamps are tight and completely collector. secured. over the bags. -41- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Technical Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -42- Model G0671/G0672/G0673 (Mfd. Since 6/17)
TRIP IND. MAGNETIC SWITCH TEST RESET ASSEMBLY 98 NO 95 NC 96 NC 97 NO See Figure 55 on Page 46. MOTOR MOTOR 220V 440V 3-PHASE 3-PHASE Ground Ground READ ELECTRICAL SAFETY -45- Model G0671/G0672/G0673 (Mfd. Since 6/17) ON PAGE 42!
G0672 Parts Breakdown 33V3 33-6 33-2V2 33-4 33-5 33-1 33-3V2 -49- Model G0671/G0672/G0673 (Mfd. Since 6/17)
Page 52
HEX BOLT 3/8-16 X 1-1/4 P0672018 COLLECTOR DRUM P0672040 RUBBER GASKET P0672019 BAG CLAMP P0672041 FLAT WASHER 3/8 P0672020 FILTER BAG 2.5 MICRON 23-5/8" X 70" P0672042 COMBO WRENCH 10 X 12MM P0672021 RIGHT LEG -50- Model G0671/G0672/G0673 (Mfd. Since 6/17)
MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact Grizzly at (800) 523-4777 or www.grizzly.com to order new labels. -53-...
Would you recommend Grizzly Industrial to a friend? _____ Yes _____No Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times. _____ Yes _____No 10.
Page 58
FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE...
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.