Grizzly G0638HEP Manual page 14

49. Align mounting holes of small cyclone funnel
and cyclone funnel adapter then attach with
(4) ⁄ "-16 x 1" hex bolts, (8)
3
8
"-16 lock nuts (see Figure 37).
ers, and (4) ⁄
3
8
Small
Cyclone
Funnel
x 4
Figure 37. Small cyclone funnel attached to
adapter.
50. Remove collection drum from under lid, and
secure hex bolts from Step 45 with (2)
lock nuts.
IMPORTANT: DO NOT overtighten. Only
tighten lock nuts until they are flush with bot-
tom of hex bolts.
51. Move collection drum back under lid.
52. Connect drum lid to small cyclone funnel with
9" clear flexible duct and (2) 9" hose clamps
(see Figure 38).
Figure 38. Cyclone funnel connected to drum lid
with flexible hose (stand and drum removed for
clarity).
-14-
⁄ " thin flat wash-
3
8
Cyclone
Funnel
Adapter
⁄ "-16
3
8
Small
Cyclone Funnel
Drum Lid
53. Attach handle hook to lower stand brace
above handle with (1)
⁄ " flat washers, and (1)
3
8
Figure 39).
IMPORTANT: DO NOT tighten nut complete-
ly to allow hook to move.
Handle Hook
Figure 39. Handle hook attached to lower stand
brace.
54. Connect other end of vacuum hose to col-
lection drum vacuum port and secure with
remaining hose clamp.
55. Secure vacuum hose inside upper and lower
stand legs with (2) U-shaped clips (see
Figure 40).
Figure 40. Securing vacuum hose to stand legs.
Model G0638HEP (Mfd. Since 7/20)
⁄ "-16 x 1" hex bolt, (2)
3
8
⁄ "-16 lock nut (see
3
8
Lower Stand Brace