Configuring Network Camera Control; Configuring Audio - Sony IPELA NSR-1200 User Manual

2
Select the analog camera, and click the [Control] tab.
3
Configure each item.
3
1 Select a protocol in accordance with the analog
camera.
2 Click [Apply].
3 Select [Control] for each channel, and configure the
control number configured on the analog camera.
4 Click [Apply].
Controlling the pan, tilt, and zoom on the analog
camera becomes possible.
Note
Make sure that the serial port is configured according
to the analog camera you are using. You can configure
the serial port from the Setup Menu of the
Administration Menu.
Configuring Network Camera
Control
The pan and tilt speed is adjusted automatically according
to the zoom level on Sony cameras. You can configure the
pan and tilt speed on ONVIF-compliant cameras.
1
24
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the network camera, and click the [Control] tab.
For Sony cameras
For ONVIF-compliant cameras
3
For ONVIF-compliant cameras, adjust the pan and tilt
speed using the slider, and click [Apply].

Configuring Audio

Configure settings for monitoring audio.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the camera for which to enable audio, and click
the [Audio] tab.
Configuring Camera Operations
55