Configuring Control Protocols For Analog Cameras; Configuring Network Camera Control - Sony IPELA NSR-500 Series User Manual

Configuring Control Protocols for
Analog Cameras
When an optional NSBK-EB05 is installed, configure the
control protocols for the analog cameras to control the pan,
tilt, and zoom on the cameras.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the camera server or NSBK-EB05, and click the
[Control] tab.
3
Configure each item.
3
1 Select a protocol in accordance with the analog
camera.
2 Click [Apply].
3 Select [Control] for each channel, and configure the
control number configured on the analog camera.
4 Click [Apply].
Controlling the pan, tilt, and zoom on the analog
camera becomes possible.
50
Configuring Camera Operations
1
24
Note
Make sure that the serial port is configured according to
the analog camera you are using. You can configure the
serial port from the Setup Menu of the Administration
Menu.
Configuring Network Camera
Control
You can configure settings to control pan and tilt speed
based on the zoom level of the camera.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the network camera, and click the [Control] tab.
3
Select the [Auto Pan & Tilt Speed] check box, and
click [Apply].
Pan and tilt speed will be controlled based on the zoom
level of the camera.