Rear - Sony IPELA NSR-1200 User Manual

Network surveillance server
Hide thumbs Also See for IPELA NSR-1200:
Table of Contents

Advertisement

Rear

NSR-1200/1100
1
NSR-1050H
1
A Fan
Take care not to obstruct the fan grille. If the grille is
obstructed, heat may build up in the unit, leading to
damage and/or fire.
B Power switch
Press the switch in the 1 position to turn on the unit.
C RS-232C Connector
Use this connector to control analog cameras.
This connector cannot be used at the same time as the
RS-422/485 connector (four rightmost pins on F
alarm output connector).
D UPS connector (RS-232C)
Use this connector to connect the control line of the
uninterruptible power supply (UPS).
Additional configuration is necessary to perform
automatic shutdown with the UPS. Select [Enable] in
the UPS screen of the Setup Menu, and configure the
protocol according to the UPS in use. For details, see
"Setting Items of UPS Screen" (page 19).
2
3
4
qf
qd
qs
2
3
4
qf
qd
qs
5
6
qa
0
9
5
6
qa
0
9
E Sensor input connector
Use this connector to connect the sensor input lines.
For connection details and wiring diagrams for sensor
inputs, see "I/O Port" (page 137).
F Alarm output connector
Use this connector to connect the alarm output lines.
For connection details and a wiring diagram for alarm
output, see "I/O Port" (page 137).
G HDMI monitor connectors (1 and 2)
Use these connectors to connect monitors that support
HDMI input.
HDMI monitor connector 1 and L monitor connector
1 (and monitor connector 1 on the front of the unit)
cannot be used at the same time, while HDMI monitor
connector 2 and L monitor connector 2 cannot be
used at the same time.
7
8
7
qg
8
Features and Functions
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipela nsr-1000 seriesIpela nsr-1100Ipela nsr-1050h

Table of Contents