Periodically Saving Configuration Data; Restoring Configuration Data - Sony IPELA NSR-1200 User Manual

2
Select the media to save the configuration data, enter
the file name for the configuration data, and click
[OK].
You can use alphanumeric characters and some
symbols (periods (.), hyphens (-), underscores (_))
when entering the file name.
A progress bar is displayed during the backing up of
the configuration data, and the configuration data is
saved when the backup is finished.
3
Click [Close].
Note
When saving of the configuration data finishes, the
following files are created in the save location.
<Configuration data save name>.item
<Configuration data save name>_db.tar.gz
<Configuration data save name>_img.tar.gz
<Configuration data save name>_os.tar.gz
Example: When the configuration data is saved under
the name "Configuration001," files with the names
shown below are created.
Configuration001.item
Configuration001_db.tar.gz
Configuration001_img.tar.gz
Configuration001_os.tar.gz
Periodically Saving Configuration
Data
You can periodically back up the database as a provision
for when the database is lost due to unforeseen problems.
1
Click [Configuration] in the Save Configuration
screen.
The Database maintenance screen appears.
24
Saving and Restoring Configuration Data
2
Select the [Weekly / Daily backup] check box, specify
the day of the week and time to perform backup, and
then click [OK].
Note
If you select the [Execute database maintenance at the
next startup] check box, the database will be backed up
and cleaned up at each startup. If a large volume of
recorded data is stored, this process may take several
minutes.

Restoring Configuration Data

Caution
• Note that the following information is not restored.
– Recording records
– System settings other than [Camera Auto Registration]
(Items of [Setup Menu] (page 13))
– Logs
• The settings of the external storage itself cannot be
restored, so it is necessary to configure them to the same
settings as those at the time of saving.
• The configuration data cannot be restored if the first two
digits of the current version (e.g.: "a.b" of "a.b.c"
separated by ".") differ from those at the time of saving
or the model differs.
• When the configuration data is restored, the recording
operation performed up until that point is stopped
automatically. If a recording schedule has been
configured, recording resumes automatically after
restoration. If manual recording was performed, it needs
be started again.
1
Click [Restore Configuration] in the Administration
Menu.