Registering Device Groups - Sony IPELA NSR-1200 User Manual

4
After completing the setting procedure, check all the
settings to make sure they are set to appropriate values.
5
Start operation.

Registering Device Groups

You can set a device group for each floor or region that a
device is installed in order to improve management
efficiency. Also, you can set the permissions for the
operations users and user groups can perform for each
device group.
Registering a Device Group
Select [Group] in the tree on the left of the Device
Configuration screen, and click
Notes
• When you want to create a sub-group below a group,
select the upper group and click
• When you want to rename a group, click a group name
selected in the tree and then enter the new group name.
Next, add devices to the device group.
Adding Devices to a Group
Drag and drop the devices you want to belong to the group
onto the icon of the group in the tree to add them to the
group.
40
Registering Devices
Removing Devices from a Group
Drag the icons of the devices you want to remove from the
group outside of the tree.
Deleting a Group
(Add) to add a group.
Select the group you want to delete in the tree, and click
(Add).
(Delete) to delete the group.