Using Camera Presets; Performing Camera Tours - Sony IPELA NSR-1200 User Manual

xPerforming Zooming In and Out Operations
When using a mouse with a scroll wheel, you can zoom in
and out by rotating the wheel.
• Rotate the wheel forward to zoom in.
• Rotate the wheel backward to zoom out.
1) Zooming in and out with digital zoom is not supported.

Using Camera Presets

You can move the camera to preset positions stored on the
camera.
Note
You can also configure a new preset. For the configuration
procedure, refer to "Configuring Preset Positions"
(page 48).
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Select a preset in [Preset] on the Camera Control pane.
The camera moves to the preset position.
122
Controlling Cameras

Performing Camera Tours

You can perform "tours," in which the camera moves
1)
successively to preset pan, tilt, and zoom positions. The
1)
camera only stops at each preset position for the duration
set in advance.
Using the shadow tour function, you can also perform
tours of camera motions recorded manually.
Note
To use the camera tour or shadow tour functions, a camera
tour or shadow tour must be configured beforehand. For
details on configuring a tour, see "Configuring Camera
Tours" (page 49) or "Configuring Shadow Tours"
(page 50).
1
2
Select any monitor frame, and display the images of
the camera you want to control.
Select a camera tour in [Tour] on the Camera Control
pane, and click (Start Camera Tour).
Tours labeled P-1, P-2, etc. are camera tours and S-1
to S-4 are shadow tours.
The camera tour is performed.