Configuring Edge Storage Settings - Sony IPELA NSR-1200 User Manual

Configuring Edge
Storage Settings
If the camera is equipped with an Edge Storage function,
and you can configure settings for downloading the images
stored on the camera's Edge Storage.
When this function is enabled and a video loss occurs
during a recording schedule, video is recorded to the
camera's Edge Storage, allowing you to retrieve the data
later after the system is restored.
Note
You may need to adjust video settings to use the Edge
Storage function. For details, refer to the release notes for
the camera.
1
Click [Device] at the top of the Configuration screen.
The Device Configuration screen appears.
2
Select the camera from the [Device] tree structure on
the left side of the screen.
You can also select multiple cameras at once by
holding down the Shift key or Ctrl key while selecting.
Note
If you selected multiple cameras and one or more of
the cameras do not support Edge Storage, the [Storage]
tab will not appear.
76

Configuring Edge Storage Settings

3
On the [Storage] tab, select the [Edge Storage] check
box, and click [Apply].
The Edge Storage function is configured.