Controlling Cameras; Performing Pan, Tilt, And Zoom Operations - Sony IPELA NSR-1200 User Manual

Controlling Cameras

When monitoring with a camera equipped with pan and tilt
functions, you can monitor images from the camera while
performing pan, tilt, and zoom operations on the Camera
Control pane on the right side of the screen or with the
mouse.
For details on the operating procedure of the Camera
Control pane, refer to "Functions and Operating
Procedure of Main Screen" (page 114).
Note
Camera control is only enabled for network compatible
cameras.
Performing Pan, Tilt, and Zoom
Operations
Using Camera Control Pane to Control
Camera
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Use the Camera Control pane to control the camera.
Using Mouse to Control Camera
By operating the mouse over the image displayed in a
camera monitoring window, you can perform camera
operations such as centering, panning, tilting, and
zooming.
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Click on the Camera Control pane.
xCentering the Image
If you click the mouse on the image, the camera centers on
the location that was clicked.
xPerforming Pan, Tilt, and Zoom Operations
If you click and drag the mouse over the image, a red box
appears.
When the mouse button is released, the camera moves until
the portion of the image inside the red box fills the
window.
121
Controlling Cameras