Using Camera Presets - Sony IPELA NSR-500 Series User Manual

Using Mouse to Control Camera
By operating the mouse over the image displayed in a
camera monitoring window, you can perform camera
operations such as centering, panning, tilting, and
zooming.
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Click
xCentering the Image
If you click the mouse on the image, the camera centers on
the location that was clicked.
xPerforming Pan, Tilt, and Zoom Operations
If you click and drag the mouse over the image, a red box
appears.
When the mouse button is released, the camera moves until
the portion of the image inside the red box fills the
window.
on the Camera Control pane.
xPerforming Zooming In and Out Operations
When using a mouse with a scroll wheel, you can zoom in
and out by rotating the wheel.
• Rotate the wheel forward to zoom in.
• Rotate the wheel backward to zoom out.
1) Zooming in and out with digital zoom is not supported.

Using Camera Presets

You can move the camera to preset positions stored on the
camera.
Note
You can also configure a new preset. For the configuration
procedure, refer to "Configuring Preset Positions"
(page 45).
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Select a preset in [Preset] on the Camera Control pane.
The camera moves to the preset position.
1)
1)
105
Controlling Cameras