Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Time Information:
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Info" is displayed, and press ENTER.
2. Press the UP or DOWN buttons to scroll through the different information menus. Press ENTER
to access your desired menu.
3. Use the UP and DOWN buttons to scroll through time information menu.
• "TimeInfo Current" - This will display the current running time of the fixture in hours.
• "TimeInfo TotalTim" - This will display the total running time of the fixture in hours.
"TimeInfo LastClea" - This will display the last time the running time was cleared.
"TimeInfo TimerPIN" - This menu function will allow you to clear the running time.
"TempInfo" - This will display the current running temperature
"Model Inf" - This will display the model name.
"ErrorInf" - This will display any error information.
Secondry Setting - With this function you can set the unit as a "Secondary" in Primary-Secondary
configuration.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Secondry" is displayed, and press ENTER.
2. The unit is now set as a "Secondary" in a Primary-Secondary configuration.
Manual Control - With this function you can manually adjust all colors to make your own desired
color.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Manual" is displayed, and press ENTER.
2. Press the UP or DOWN buttons to scroll through dimmer, the 6 colors, and strobe. Press ENTER
and use the UP and DOWN buttons to make adjustments.
3. Once you have made your desired adjustments, press ENTER.
PRIMARY-SECONDARY CONFIGURATION
Primary-Secondary Configuration:
This function will allows you to link units together to run in a Primary-Secondary set-up. In a
Primary-Secondary set up one unit will act as the controlling unit and the others will react to the
controlling units built-in programs. Any unit can act as a Primary or as a Secondary however, only
one unit can be programmed to act as the "Primary."
Primary-Secondary Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR data
cables to link your units together. Remember that the Male XLR connector is the input and the
Female XLR connector is the ouput. The first unit in the chain (primary) will use the female XLR
connector only. The last unit in the chain will use the male XLR connector only.
2. Connect the first "Secondary" unit to the "Primary."
3. Set the "Primary" unit to your desired mode of operation. On the "Secondary" unit's press the
MODE button and use the UP or DOWN buttons until "Menu Secondry" is displayed and press
ENTER.
21
Advertisement
Table of Contents
