Table of Contents
Advertisement
P R I M A R Y- S E C O N D A R Y C O N F I G U R AT I O N
This function will allows units to be linked together to run in a Primary-Secondary set-up, where one
unit will act as the controlling unit and the others will react to the controlling unit's built-in programs.
Any unit can act as a Primary or as a Secondary, but only one unit in a linked system can be pro-
grammed to act as the Primary.
Primary-Secondary Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of each unit. Use standard XLR data
cables to link your units together. Remember that the male XLR connector is the input and the
female XLR connector is the output. The first unit in the chain (primary) will use the female XLR
connector only, and the last unit in the chain will use the male XLR connector only.
2. Connect the first "Secondary" unit to the "Primary."
3. Set the "Primary" unit to your desired mode of operation. On the "Secondary" unit(s) press the
MODE button and press the UP or DOWN buttons until "Secondary" is displayed and press EN-
TER.
4. The Secondary unit(s) will now follow the Primary unit.
P I X E L Z O N E S
1
1
5
5
1
2
2
1
2
2
5
6
6
5
6
6
3
3
3
3
7
7
7
7
31
4
4
4
4
8
8
8
8
Advertisement
Table of Contents
