Primary-Secondary Setup - ADJ ELEMENT Series User Instructions

P R I M A R Y- S E C O N D A R Y S E T U P

Primary-Secondary Setup:

This function allows you to link units in a Primary-Secondary setup. In this setup, one unit acts as
the controlling unit, and the others react to the controlling unit's built-in programs. Any unit can be a
Primary or a Secondary, but only one unit can be programmed as the "Primary."
Primary-Secondary Connections and Settings:
1. Daisy chain your units using XLR connectors on the rear of the unit. Use standard XLR data cables
to link your units together. The Male XLR connector serves as the input, while the Female XLR
connector serves as the output. The first unit in the chain (Primary) uses the female XLR connector,
and the last unit in the chain uses the male XLR connector.
2. Connect the first Secondary unit to the Primary unit.
Set the Primary unit to your desired mode of operation. On the Secondary unit(s), press the MODE
3.
button until "SEcd" is displayed.
27