Page 2
All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
Layout DMX Set Up DMX Addressing DMX Channel Modes Color Macro Chart System Menu Operating Instructions Dimmer Curve Chart Dimensional Drawings Power Linking/Trouble Shooting/Cleaning Warranty Technical Specifications ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 2...
12P Hex IP Introduction Unpacking: Thank you for purchasing the 12P Hex IP by ADJ Products, LLC. Every 12P Hex IP has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the ship- ping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
Ensure ALL connections and end caps are properly sealed with a non-conductive dielectric grease (available at most electrical suppliers) to prevent water ingress/condensation and/or corrosion. ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 4...
Page 6
B. Objects have fallen, or liquid has been spilled into the fixture. C. The fixture does not appear to operate normally or exhibits a marked change in performance. D. The fixture has fallen and/or subjected to extreme handling. ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 5...
Page 7
INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE DISORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET (UV) LIGHT EMITTED FROM THIS FIXTURE. ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 6...
Page 8
O P T I O N A L C O R R O S I O N - R E S I S T A N T C O A T I N G Optional Corrosion-Resistant Coatings may be available for this fixture. Please consult your ADJ Products, LLC sales representative for details. ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 7...
12P Hex IP Layout LCD Screen Mode Button Up Button Down Button Enter Button Seetronic In Port Seetronic Out Port 3-Pin XLR Out Port 3-Pin XLR In Port ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 8...
2 Cold 2 Cold 1 Ground Pin 1 = Ground Pin 2 = Data Compliment (negative) 3 Hot 3 Hot Pin 3 = Data True (positive) Figure 3 ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 9...
Page 11
Pin 1 Data Compliment (- signal) Pin 2 Pin 2 Data True (+ signal) Pin 3 Pin 3 Not Used Do Not Use Not Used Do Not Use ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 10...
Page 12
1, the second unit to 14 (13 + 1), the third unit to 27 (14 + 13), and so on. (See chart below for more details.) Unit 1 Unit 2 Unit 3 Unit 4 Channel Mode Address Address Address Address 6 channels 7 channels 8 channels 13 channels ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 11...
Page 13
From slow to fast 0 - 255 Dimmer Modes 0 - 20 Standard 21- 40 Stage 41- 60 61- 80 Architectural 81- 100 Theatre 101- 255 Default to unit setting ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 12...
Info Was Cleared (Hours) TimeInfo TimeInfo TimerPIN Clear 0 Password: (Password=050) Total Time Clear 0: (Password=060) Menu Info ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 15 Current Running Info TempInfo Temperature TempInfo Info Model Name...
Page 17
ManCtrl Dimmer 000~ ManCtrl Red 000~255 ManCtrl Green 000~255 Menu ManCtrl Blue 000~255 Manual Control Manual ManCtrl White 000~255 ManCtrl Amber 000~255 ManCtrl Purple 000~255 ManCtrl Strobe 000~255 ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 16...
ENTER. Use the UP or DOWN buttons to highlight “AUTO RUN FQN” and press ENTER. 2. Use the UP or DOWN buttons to scroll through the 99 Auto Run programs. Press ENTER to confirm your selection. ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 17...
Page 19
3. Use the UP or DOWN button to toggle between “ON’ and “OFF”, press ENTER to make your selection. Press the MODE button to make no selection and exit. ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 18...
Page 20
“TimeInfo TimerPIN” - This menu function will allow you to clear the running time. “TempInfo” - This will display the current running temperature “Model Inf” - This will display the model name. “ErrorInf” - This will display any error information. ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 19...
Page 21
3. Set the “Master” unit to your desired mode of operation. On the “Slave” unit’s press the MODE button and use the UP or DOWN buttons until “Menu Slave” is displayed and press ENTER. ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 20...
12P Hex IP Dimensional Drawing 6.64” / 168.7mm 11.73” / 298mm 2.9” / 73.6mm 10.40” / 264.1mm ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 22...
Page 24
3. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi- due, dust, dew). ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 23...
Page 25
ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. ADJ Products, LLC 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-2650 / Fax: 323-582-2941 www.adj.com / info@americandj.com A.D.J.
Need help?
Do you have a question about the HEX206 and is the answer not in the manual?
Questions and answers