12 Technical Data; Noise And Vibration Information - Wacker Neuson BS Operator's Manual

12 Technical data

12 Technical data
12.1

Noise and vibration information

The noise and vibration information listed was determined according to the following guidelines with the
machine-typical operating states / specific test conditions while applying harmonized standards:
Machines directive 2006/42/EC

Noise emissions directive 2000/14/EC

In operational application, deviating values may result depending on the prevailing operating conditions.
12.1.1 Noise information
Sound pressure level at the operator's location
The LWA was determined pursuant to EN ISO 11201 and EN 500-4.

Guaranteed sound power level
The LWA was determined pursuant to EN ISO 3744 and EN 500-4.

12.1.2 Hand-arm vibration (HAV) information
Weighted total vibration value
The HAV was determined pursuant to EN ISO 20643 and EN 500-4.

12.2 BS
Designation
Item number
Percussion rate
Power transmission
Length
Width
Height
Length (ramming shoe)
Width (ramming shoe)
Travel speed
Weight
Electrical load rating
Nominal speed
Standard
Special lubricant
Storage temperature range
Operating temperature range
Sound pressure level L
Sound power level L
measured
guaranteed
Vibration total value a
Uncertainty of measurement of
the vibration total value a
28
Unit
rpm
mm
mm
mm
mm
mm
m/min
kg
kW
rpm
°C
°C
dB(A)
pA
WA
dB(A)
dB(A)
2
m/s
hv
2
m/s
hv
BS30
5000005216
810
Centrifugal clutch
620
363
980
296
150
19
30.0
1.5
4,400
ISO 3046-1
S3 V220C 2
-30 – +50
-10 – +40
98
105
108
12.0
3.0
100_0201_td_0001.fm