Related Manuals for Wacker Neuson BS
Summary of Contents for Wacker Neuson BS
- Page 1 Operator’s manual Vibratory rammer BS30 Model Document 5100002590 08.2020 Issue Version Language...
- Page 2 Any breach of the statutory provisions, in particular the protection of copyright, will lead to civil and criminal prosecution. Wacker Neuson Produktion GmbH & Co. KG is constantly working on the improvement of its products as part of the technical further development. Therefore, we reserve the right to make changes to the illustrations and descriptions in this documentation without incurring any obligation to make changes to machines already delivered.
- Page 3 CALIFORNIA Proposition 65 Warning CALIFORNIA Proposition 65 Warning WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. WARNING Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.
-
Page 5: Table Of Contents
Personnel qualification......................... 9 Residual dangers......................... 9 General safety instructions ......................9 Specific safety instructions – Vibratory rammer BS..............10 3.10 General safety instructions – Combustion engines ..............10 3.11 General safety instructions – Fuel, lubricants and coolants ............11 3.12 Maintenance ..........................11 3.13 Personal Protective Equipment .................... - Page 6 Troubleshooting ........................27 11.1 Fault table ..........................27 Technical data ........................28 12.1 Noise and vibration information ....................28 12.2 BS .............................. 28 12.3 Combustion engine........................29 ..................30 EC Declaration of Conformity DIN EN ISO 9001 certificate ......... .31...
-
Page 7: Preface
This operator's manual contains important information and procedures for the safe, proper and economic operation of this Wacker Neuson machine. Carefully reading, understanding and observing is an aid to avoiding hazards, repair costs and downtime, and therefore to increasing the availability and service life of the machine. -
Page 8: Introduction
The information contained in this manual is based on machines manufactured up to the time of printing. Wacker Neuson reserves the right to change this information. The manufacturer shall immediately include any modifications or additions in this manual. -
Page 9: Wacker Neuson Contact Partner
2 Introduction NOTICE Supplementary information. Wacker Neuson Contact partner Depending on the country, the Wacker Neuson contact partner is a Wacker Neuson service department, a Wacker Neuson subsidiary, or a Wacker Neuson dealer. On the Internet at www.wackerneuson.com. Disclaimer For the following violations, Wacker Neuson dismisses any liability for personal injury or material damage: Failure to follow this manual. -
Page 10: Security
The following in particular are considered structural changes: Opening the machine and the permanent removal of components. Installing spare parts that do not originate from Wacker Neuson or are not comparable in the design system and quality of the original parts. -
Page 11: Personnel Qualification
3 Security Periodically check whether the user instructions correspond to the current state of regulations. Clearly regulate and specify the responsibilities for installation, operation, troubleshooting, maintenance and cleaning. Regularly train employees and inform them about potential hazards. Periodically refresh the instruction. -
Page 12: Specific Safety Instructions - Vibratory Rammer Bs
Defective machines have a high risk of accidents. Use the machine, accessories, insertion tools, etc. according to these instructions. Specific safety instructions – Vibratory rammer BS 3.9.1 External influences The vibratory rammer may not be operated in the event of the following external influences: In an explosive vicinity. -
Page 13: General Safety Instructions - Fuel, Lubricants And Coolants
Observe the maintenance schedule. Non-listed work must be taken over by the service department of the Wacker Neuson contact partner. Immediately replace worn or damaged machine parts. Only use spare parts from Wacker Neuson. Keep the machine clean. -
Page 14: Safety Devices
Technical data. Work particularly cautiously and pay attention when wearing ear protection, as your ability to hear noises, such as screams or signal tones, is restricted. Wacker Neuson recommends always wearing ear protection. 3.14 Safety devices Safety devices protect the user of this machine from being exposed to existing hazards. These are barriers (separating protective devices) or other technical measures. -
Page 15: Safety And Information Labels
4 Safety and information labels Safety and information labels WARNING Illegible symbols Over time, labels and signs on the machines can become dirty or otherwise unrecognizable. Keep all safety, warning, and operating instructions on the machine in a legible condition. -
Page 16: Setup And Function
Functional characteristics Principle The Wacker Neuson vibratory rammer essentially consists of the drive motor, ramming system, ramming shoe and control handle. The drive occurs via a gasoline engine. This gasoline engine works according to the two-stroke principle and is mechanically started via a starter rope on the recoil starter. -
Page 17: Components And Operator's Controls
6 Components and operator's controls Components and operator's controls Components Item Designation Item Designation Control handle Ramming system Handle Ramming shoe Vibration damper Fuel tank Guide cylinder Nameplate Crankcase Operator's controls Item Designation Item Designation Control handle Fuel pump bellows Fuel cock Choke Gas throttle lever... -
Page 18: Transport
7 Transport Transport WARNING Improper handling may result in injury or serious material damage. Please read and follow all safety instructions in this operator's manual. WARNING Danger from falling. Falling machines can cause serious injuries from crushing. Only use suitable and tested lifting gear and slings with sufficient lifting capacity. ... -
Page 19: Storage
8 Storage Item Designation Control handle 1. Attach suitable sling gear to the control handle. 2. Carefully load the machine into or onto a stable means of transport capable of bearing the load. Turn the machine on its side. Item Designation Attachment of the tension belt 3. -
Page 20: Operation And Use
Inspection before commissioning Check the machine and components for damage. In the event of visible damage, do not operate the machine and immediately contact a Wacker Neuson dealer. Ensure that loose packaging material has been removed from the machine. ... -
Page 21: Commissioning
9 Operation and use CAUTION Beware of physical impairments caused by vibration. Take breaks periodically. CAUTION Injuries or material damage. There can be strong recoils on firm, hard or rigid bottoms. Avoid these bottoms. In accordance with the intended purpose, the operator should stand behind the machine. ... - Page 22 9 Operation and use Carry out preparations Item Designation Item Designation Fuel cock Gas throttle lever Fuel pump bellows Choke Starter rope 1. Firmly hold the machine with one hand on the control handle. 2. Open fuel cock. 3. Press the fuel pump bellows until the bellows are completely filled with fuel. Item Designation Item...
-
Page 23: Operation
9 Operation and use NOTICE To start the engine, remove the engine at least 3 m from the refueling point. 1. Hold the machine firmly by the control handle with your left hand. 2. Choke ON. 3. Actuate the gas throttle lever - half-throttle position. 4. -
Page 24: 10 Maintenance
You will be responsible for handing over your off-road engine equipment with spark ignition to a Wacker Neuson service center as soon as a defect occurs that falls under the warranty. Wacker Neuson could provide additional equipment services at an authorized Wacker Neuson service center that are not related to the engine or emissions control system, but that are included in the maintenance instructions below. -
Page 25: Maintenance Schedule
Replace fuel filter.* Replace air filter.* Clean the spark plug. Replace if necessary.* Have this work performed by the service department of your Wacker Neuson contact partner. 10.3 Maintenance work CAUTION Health risk from fuel, lubricants and coolants. - Page 26 10 Maintenance 10.3.2 Top off the fuel WARNING Risk of fire and explosion from fuel and fuel vapors. Do not smoke. Do not refuel near open flames. Switch off engine and allow it to cool before refueling. CAUTION Health risk from fuel.
- Page 27 10 Maintenance Installing the air cleaner cartridge 1. Insert air cleaner cartridge. 2. Seat the air cleaner cover. 3. Tighten all nuts of the air filter cover. NOTICE The engine might wear faster when operating it without an air filter. Do not operate the engine without an air cleaner or air cleaner cover.
- Page 28 10 Maintenance Item Designation Isolator 1. Check the isolator - if damaged, replace the spark plug. 2. Clean the electrodes with a wire brush. 3. Measure the spark plug air gap with a feeler. If necessary, correct by bending the side electrode. For the spark plug type and spark plug air gap, see chapter Technical Data.
-
Page 29: 11 Troubleshooting
The engine revs up, but the Defective centrifugal clutch. Have the centrifugal clutch ramming system has no power. replaced.* Recoil starter defective. The starter rope is stuck. Have the starter rope replaced.* The starter rope is torn. Contact your Wacker Neuson contact partner. 100_0201_ts_0001.fm... -
Page 30: 12 Technical Data
12 Technical data 12 Technical data 12.1 Noise and vibration information The noise and vibration information listed was determined according to the following guidelines with the machine-typical operating states / specific test conditions while applying harmonized standards: Machines directive 2006/42/EC ... -
Page 31: Combustion Engine
12 Technical data 12.3 Combustion engine Designation Manufacturer Wacker Neuson Type of engine WM80 Combustion method Two-cycle Cooling Air cooling Cylinders Displacement Fuel type Oil/alkylate fuel mixture Fuel consumption Mixture preparation Carburetor Fuel gasoline/oil mixing ratio 100:1 / 50:1 Tank capacity... -
Page 32: Ec Declaration Of Conformity
EC Declaration of Conformity Manufacturer Wacker Neuson Produktion GmbH & Co. KG, Wackerstraße 6, D-85084 Reichertshofen This declaration of conformity is issued under the sole responsibility of the manufacturer. Product BS30 Product type Vibratory rammer Function of product Soil compaction...
Need help?
Do you have a question about the BS and is the answer not in the manual?
Questions and answers