Technical Data; General Instructions; Noise And Vibration Data - Wacker Neuson BS Series Operator's Manual

Technical Data

13.1 General instructions

13 Technical Data
13.1 General instructions
13.2

Noise and vibration data

13.3 BS
Type
Material number machine
Material number engine
Number of strokes [1/min]
Impact force [kN]
Forward travel [m/min]
Length [mm]
Width [mm]
Height [mm]
Length (Ramming shoe) [mm]
46
Information
For system technical reasons, empty columns can be displayed in the
technical data, and numbers and letters that written in superscript or
subscript may be displayed incorrectly, e.g:
► Sound power level LWA instead of L
► Sound pressure level LpA instead of L
► Vibration total value ahv instead of a
► Carbon dioxide CO2 instead of CO
► Unit m/s2 instead of m/s
The noise and vibration data listed have been determined in accordance
with the following guidelines for the typical machine operating conditions /
special test conditions and using harmonized standards:
• Machinery Directive 2006/42/EC
• Noise Emission Directive 2000/14/EC
During operational use, values may differ depending on the prevailing
operating conditions.
Sound pressure level at operator station
• L was determined according to EN ISO 11201 and EN 500-4.
pA
Guaranteed sound power level
• L was determined according to EN ISO 3744 and EN ISO -4.
WA
Weighted vibration total value hand-arm vibration
• a was determined according to EN ISO 20643 and EN 500-4.
hv
BS65-4As 11in SAM
5100061307
5100058517
WA
pA
hv
2
2
BS72-4As 11in SAM
656
16
7,1
673
343
940
340
Operator's Manual | BS | 5100061347 | 03/2021 | [au]
5100061309
5100058517
656
18
8,8
673
343
965
340