Specific Safety Instructions - Vibratory Rammer Bs; General Safety Instructions - Combustion Engines - Wacker Neuson BS Operator's Manual

3 Security
3.8.4 Handling and use
Do not operate machines whose switches are defective. Have defective switches exchanged

immediately. Machines with defective switches have a high risk of injury.
Store unused machines out of the reach of children. The machine may only be operated by

authorized personnel.
Handle the machine with care. Have defective parts exchanged immediately before the machine is

operated. Defective machines have a high risk of accidents.
Use the machine, accessories, insertion tools, etc. according to these instructions.

3.9 Specific safety instructions – Vibratory rammer BS
3.9.1 External influences
The vibratory rammer may not be operated in the event of the following external influences:
In an explosive vicinity.

Oil field environments – methane leaks from ground. Explosion hazard!

In dry, flammable vegetation. Fire hazard!

3.9.2 Take work breaks regularly
When operating this machine for long periods of time, vibration-induced circulatory disorders may occur
to your fingers, hands or wrists.
Symptoms:
The aforementioned body parts falling asleep, tingling, pain, sharp pains and changes to skin color.

NOTICE
If these symptoms are determined, seek medical attention immediately.
If you have a personal disposition to poor blood circulation, your working time may be reduced

despite wearing protective gloves and taking regular work breaks.
3.9.3 Operational safety
When operating the machine, make sure that no gas, water, or electric lines are damaged.

The machine must not be operated in tunnels or enclosed spaces.

Pay maximum attention near drops or slopes. Risk of crashing!

In trenches and pits, pay very close attention to the sidewalls to ensure they are stable and do not

collapse from the vibration. Danger of collapse!
Do not leave the machine unattended. Risk of injury!

Delimit spacious workspace and restrict access to unauthorized individuals. Risk of injury!

Machine operators must ensure that people in the working area keep a minimum distance of 5 meters

from the running machine.
3.10 General safety instructions – Combustion engines
The following notes must be observed:
Before starting work, check the engine to ensure there are no leaks and cracks in the fuel lines, tank

and fuel cap.
Do not operate a defective engine. Replace damaged parts immediately.

The pre-set engine speed may not be adjusted. This could lead to engine damage.

Make sure that the exhaust system of the engine is free of debris. Fire hazard!

Switch off the engine and allow it to cool before refueling.

Use the correct fuel type. The fuel may not be mixed with other liquids.

Use clean filling aids for refueling. Do not spill fuel. Immediately wipe up any spilled fuel.

The engine may not be started near spilled fuel. Explosion hazard!

When operating in partially enclosed spaces, adequate aeration must be ensured. Do not inhale

exhaust fumes. Risk of poisoning!
The engine surface and exhaust system can quickly become extremely hot. Risk of burns!

10
100_0201_si_0001.fm