Adjustment Of The Follow Position - Mitsubishi Electric CR750-D Series Instruction Manual
Circular arc tracking function
Hide thumbs
Also See for CR750-D Series:
- Instruction manual (126 pages) ,
- Instruction manual (222 pages) ,
- Instruction manual (730 pages)
Table of Contents
Advertisement
9 Setting of an operating condition and operations check ("1"Program)
9.3.
Adjustment of the follow position
When driving a turntable, the position where photoelectronic sensor reacts to a workpiece is different from the
set position in "A1" program.
Therefore, after determining the rotation speed of the turntable, you have to adjust the position with the
following procedure.
(1)
Start the "Program monitor" of RT ToolBox2.
(2) Click a [Add] button and open a "Add display variables" screen. Input "M_EncSensor(1)" to a space
"variable name", and click a [OK] button. also input " P_EncDlt(1)" equally, and click a [OK] button.
*In (),specify the [condition number].
9-60 Adjustment of the follow position
*In (),specify the [encoder number].
Advertisement
Table of Contents
