Table of Contents
Advertisement
2.11
SATA HDD/SSD Drive
The UNO-3200G series product support two 2.5" SATA HDD/SSD bays with up to
6Gbps speed.
The UNO-3200G supports RAID0 and RAID1. The RAID function should be enabled
in BIOS setup before you install an operating system into a RAID volume. Users can
enable the RAID function in BIOS sub-menu "Advance\SATA Configuration".
Please follow the below steps to create a RAID volume.
1.
Mount two SATA HDDs/SSDs in the system.
2.
Power on the system.
3.
Press "F2" to enter into BIOS setup during POST.
4.
Enable RAID mode in BIOS setup menu "Advance\SATA Configuration".
5.
Press "F4" to save and exist the BIOS setup.
6.
Press "Ctrl+I" to enter RAID configuration utility when the Intel Rapid Storage
Technology option ROM screen appears.
UNO-3200G Series User Manual
Figure 2.9 SATA Mode Selection
Figure 2.10 Detecting a RAID configuration
16
Advertisement
Table of Contents
