Table of Contents
Advertisement
3.4 SATA SSD Installation
UTC-100 systems feature a 2.5" SATA SSD bay reserved for customizable storage.
To install a 2.5" SATA SSD, follow the steps outlined below.
1.
Remove the bottom and side rear cover.
2.
Loosen the affixing screws and remove the SSD bracket.
3.
Insert the SATA SSD into the SSD bracket and fasten it in place with screws.
4.
Use a power cable to connect the SATA SSD to the power supply unit.
5.
Use a SATA data cable to connect the SATA SSD to the motherboard.
6.
Replace the side and bottom rear covers.
UTC-100 User Manual
12
Advertisement
Table of Contents
