Decommissioning; Decommissioning The Device; Storage And Shipping; Storage - Sartorius Entris II Advanced Line BCA623-1S Operating Instructions Manual

Decommissioning

11 Decommissioning
11 . 1

Decommissioning the Device

Procedure
Turn the device off .
t
Disconnect the device from the power supply .
t
Disconnect the device from all connected devices
t
and all accessories, e .g . printer .
Clean the device (see Chapter 9.2, page 42).
t

12 Storage and Shipping

12 . 1

Storage

Procedure
Turn the device off .
t
Disconnect the device from the power supply .
t
Disconnect the device from all connected devices,
t
e .g . printer .
Store the device according to the ambient conditions
t
(see Chapter 14.1, page 47).

12 .2 Returning the Device and Parts

Defective devices or parts can be sent back to Sartorius .
Returned devices must be clean, decontaminated, and
properly packed .
Transport damage as well as measures for subsequent
cleaning and disinfection of the device or parts by
Sartorius shall be charged to sender .
Devices contaminated with hazardous materials, e .g .
harmful biological or chemical substances, will not be
accepted for repair or disposal . The devices must be
decontaminated before shipping (for decontamination,
see Chapter "13 . 1 Decontaminating the Device",
page 46) .
Procedure
Turn the device off .
t
Disconnect the device from the power supply .
t
Contact Sartorius Service for instructions on how to
t
return devices or parts .
Pack the device and its parts properly for return, e .g .
t
in their original packaging .
46 Entris II Advanced Line Operating Instructions
®

13 Disposal

13 . 1

Decontaminating the Device

The device does not contain any hazardous materials
that necessitate special disposal measures . If the device
has come into contact with hazardous substances: Steps
must be taken to ensure proper decontamination and
declaration .
Procedure
If the device has come into contact with hazardous
t
substances: Decontaminate the device . The operator
of the device is responsible for adhering to local
government regulations on the proper
decontamination and declaration for transport and
disposal .

13 .2 Disposing of Device and Parts

The device and the device accessories must be disposed
of properly by disposal facilities .
A lithium cell battery, type CR2032, is installed inside
the device . Batteries must be disposed of properly by
disposal facilities .
The packaging is made of environmentally friendly
materials that can be used as secondary raw materials .
Requirements
The device has been decontaminated .
Procedure
Dispose of the device . Follow the disposal
t
instructions on our website .
Inform the disposal facility that there is a lithium cell
t
battery, type CR2032, installed inside the device .
Dispose of the packaging in accordance with local
t
government regulations .