Table of Contents
Advertisement
MENU
CVM 3000
A _ MONITOR CONFIGURATION
No MENU 3 here in this Manual ;
refer
to Appendix "RF-input"
| MONITOR CONFIGURATION]
VIDEO
CONFIGURATION
RIS
CONFIGURATION
1
2
FUNCTION
CONFIGURATION
3
OSD
CONFIGURATION
4
PRESET FOLLOW VIDEO OR RF [xo]
To
return
without
saving
:
To return with saving
:
The Monitor Configuration menu permits to customize the monitor
in several ways.
1 Video Configuration : to set the input numbers of the
available physical inputs. In other words, via this menu, you
can determine the input numbers in the VIDEO mode.
Inputs can be assigned a 4-character name.
2 RIS Configuration : to set the function of the two switches
eventually connected to the TALLY & RIS connector for
remote control.
For more information, see next pages.
PRESET FOLLOW VIDEO OR RF
This customizing option determines
whether when switching from
one input to another, the monitor keeps its status or sets its status
according
to the PRESET of the new input.
Use the TOGL key to switch between YES or NO. The factory or
default setting is NO.
IfsetNO:
the monitor keeps its status when another input
(VIDEO
or RF) is selected.
NO is the factory or default setting.
If set YES: the monitor is automatically
set according to the
PRESET of the newly selected input (VIDEO or
RF).
Press ENTER to save this, or CLEAR to leave without saving.
No MENU
3 here
CVM 3000 User Manual — Software 3.X
2-7
MENU 4 Monitor Configuration (1)
Advertisement
Table of Contents
