Basic Operation; Using The Buttons On The Remote Control Unit And Monitor - Sharp PN-C603D Operation Manual

Using the buttons on the remote
control unit and monitor
n R emote control unit
2
5
6
9
10
1. INPUT (Input mode selection)
The menu is displayed. Press
ENTER
mode, and press to enter.
Input mode
HDMI1 HDMI1 input terminal (INPUT1)
HDMI2 HDMI2 input terminal (INPUT2)
HDMI3 HDMI3 input terminal (INPUT3)
INPUT4 AV component input terminals (INPUT4)*
INPUT5 AV video input terminal (INPUT5)
PC D-sub input terminal (INPUT6)
* INPUT4 can also be used as an AV video input terminal.
(See page 13.)
• For audio, an audio input terminal is selected that is
compatible with one of the terminals of INPUT1 to INPUT6.
2. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
3. MENU
Displays and turns off the menu screen. (see page 23.)
4. VOL +/- (Volume adjustment)/Cursor control
When the menu is not displayed, press
the volume menu and adjust the volume.
* If you do not press any buttons for about 3 seconds, the
volume menu automatically disappears.
To select settings, move the cursor up and down.

Basic Operation

n B uttons on the
monitor
1
3
3
4
1/6
5
7
8
4
or to select the input
Video
or to display
5. Cursor control
To select settings, move the cursor left and right.
6. ENTER
Confirms the setting.
7. RETURN
Returns to the previous screen.
8. SIZE/F3 (Screen size selection)
The menu is displayed. Press
size. (See page 22.)
Used when setting COLOR ADJUSTMENT. (See page 24.)
9. DISPLAY/F1
Displays input signal and input terminal information.
• The display disappears automatically after about 5
seconds.
Used when setting COLOR ADJUSTMENT. (See page 24.)
10. MODE/F2 (Picture mode selection)
Each time you press this button, the picture mode changes in
the following order (see page 24):
PC* → DYNAMIC → DYNAMIC (FIXED) →
STANDARD → MOVIE → PC*...
* For PC, switch only when the input mode is HDMI1,
HDMI2, HDMI3, and PC.
Used when setting COLOR ADJUSTMENT. (See page 24.)
or to select the screen
21
E