Setting And Adjusting The Monitor (Settings & Adjustments); Setting The Security (Network - Security) - Sharp TL-M5200 Setup Manual

Sharp lcd monitors setup manual
Hide thumbs Also See for TL-M5200:
Table of Contents

Advertisement

Controlling the Monitor via LAN
Setting and Adjusting the
Monitor
(Settings & Adjustments)
Example: "Picture" screen display for COMPUTER
On these screens, you can make monitor set-
tings or adjustments. You can set or adjust
the following items :
• • • • • AV Mode
• • • • • OPC
• • • • • Color Temp.
• • • • • DNR
• • • • • Film Mode
• • • • • Black
• • • • • 3D-Y/C
• • • • • Monochrome
• • • • • Power Management
• • • • • No Operation Off
• • • • • Ecology
• • • • • Old Password
• • • • • New Password
• • • • • Keylock
• • • • • Set Inputs
• • • • • Input Label
• • • • • Fine Sync
• • • • • Auto Sync
• • • • • Auto Restart
• • • • • RS-232C
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error mes-
sage ("Server Busy Error") will be displayed.
Wait for a moment and then operate again.
• You cannot operate this page while the
monitor is warming up.
• For details about each item, refer to the
monitor's operation manual.
-18
• • • • • Closed Caption
• • • • • Audio Output
• • • • • Video System
• • • • • Signal Type
• • • • • Color Space
• • • • • Dynamic Range
• • • • • OSD Language
• • • • • HDMI Setup
• • • • • Resize
• • • • • Picture Flip
• • • • • Power On Delay
• • • • • LED
• • • • • Background
• • • • • Multi Screen
• • • • • Master & Slave
• • • • • Clock
• • • • • Schedule
• • • • • SleepTimer
• • • • • All Reset
Setting the Security
(Network – Security)
On this screen, you can make settings relat-
ing to security.
Items
User Name
Setting of user name for
security protection.
Password
Setting of password for
security protection.
Accept IP
It is possible to set up to three
Address
IP addresses allowing connec-
tion to the monitor.
All IP
No limits are set to IP addresses
Addresses
connecting to the monitor.
From only
For security improvement, only an
specific IP
IP address set by "Address 1-3"
addresses
can be connected to the monitor.
Note
• User Name and Password can be up to 8
characters.
• You can input the characters below :
a-z, A-Z, 0-9, -, _
Description

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TL-M5200 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Tl-m4600

Table of Contents