Temperature Monitor Setting Proce Dures - Sharp PN-T322B Service Manual

CHAPTER 5. SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES
9. TEMPERATURE MONITOR SETTING PROCEDURES
Various temperature watch data are saved in the machine. This tool can read the various temperature watch data and reset the data.
9 - 1. OPERATING CONDITIONS OF THE
TEMPERATURE MONITOR SET-
TING TOOL
The operating conditions of the temperature monitor setting tool for the
information display are as follows.
Windows XP
n
OS Windows Vista
n
Windows 7
n
Communication RS-232C port recognized as a COM port
n
port (Which allows communication in 9600bps.)
■ WHEN CONNECTED TO THE INFORMATION
DISPLAY WITH AN RS-232C CABLE
The RS-232C cable required for communication is as stated below.
Connect the COM port of PC and the RS-232C input pin of the display
with the cable.
RS-232C cable Straight cable (D-SUB 9 pin female-female)
CAUTION
After the data of temperature watch setting is read out and the
n
reset is performed, "THERMAL SENSOR SETTING" of the
SETUP menu is set to "LANDSCAPE."
After operating the tool, be sure to reset "THERMAL SENSOR
SETTING" to the proper setting.
PN-T321/T322B SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES
5 – 6
When the temperature watch setting information needs to be retrieved,
read out the setting data by following the procedures below.
9 - 2. START-UP OF THE TEMPERA-
TURE WATCH SETTING TOOL
1 ) Press [Temp Watch] button of the Service Tool Launcher screen.
9 - 3. READ-OUT OF THE TEMPERATURE
WATCH SETTING INFORMATION
1 ) Connect the Information Display to the PC which you use via a RS-
232C cable, and then turn on the power of the Information Display.
2 ) Press [Connection Setting...] button to configure the communica-
tion settings.
3 ) Press [Read] button. The temperature information is displayed.
4 ) Press [Save] button, and save the readout information in an appro-
priate file.