Setting The Monitor On The Wall - Sharp PN-Q601 Operation Manual

>>
Appendix
<<

Setting the Monitor on the Wall

The wall mount kit commercially available allows you to mount the Monitor on the wall.
For detailed information on installing the wall mount, see the instructions provided with the product.
We recommend you to contact a technician for assistance when installing it.
SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to
install the wall mount on your own.
CAUTION
Install your wall mount on a solid wall perpendicular to the floor.
When you want to attach the wall mount to surfaces other than plaster board, please
contact your nearest retailer/adviser for additional information. If you install the Monitor
on a ceiling or slanted wall, it may fall and result in severe personal injury. Always have
two people mount the Monitor on a wall.
NOTE
Due to the terminal configuration on this Monitor, when you wall-mount this model, make sure
there is enough space between the wall and the Monitor for the cables.
To use this Monitor mounted on a wall, remove the AC cord holder on the rear of the Monitor, and
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the
Monitor.
ENG 9-2