Table of Contents
Advertisement
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, application software, etc.)
- Comprehensive description of the problem
- The exact wording of any error messages
Safety Instructions
1.
Strictly follow these Instructions for Use; please read these safety instructions
carefully.
2.
Please keep this User Manual for later reference; any use of the product requires full
understanding and strict observation of all portions of these instructions. Observe all
WARNINGS and CAUTIONS as rendered throughout this manual and on labels on the
equipment.
3.
Repair of the device may only be carried out by trained service personnel. Advantech
recommends that a service contract be obtained with Advantech Service and that all
repairs also be carried out by them. Otherwise the correct functioning of the device
may be compromised.
Warning! Because of the danger of electric shock, never remove the cover of a device
while it is in operation or connected to a power outlet.
4.
If one of the following situations arises, have the equipment checked by service personnel:
◼
The power cord or adaptor is damaged.
◼ Liquid has penetrated into the equipment.
◼ The equipment has been exposed to moisture.
◼ The equipment does not work well, or you cannot get it to work according to the user manual.
◼ The equipment has been dropped and damaged.
◼ The equipment has obvious signs of breakage.
5.
Disconnect this equipment from any DC outlet before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning and keep this equipment away from humidity.
Caution! To avoid short-circuiting and otherwise damaging the device, do not allow fluids to come
in contact with the device. If fluids are accidentally spilled on the equipment, remove the
affected unit from service as soon as possible and contact the service personnel to
verify that patient safety is not compromised.
6.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause
damage. For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
Caution! To prevent overheating, do not cover the openings or place the device in direct sunlight
or near radiant heaters.
v
USM-100 User Manual
Advertisement
Table of Contents
