Advertisement
USC-160 Series
Startup Manual
Appearance
Front View
Rear
View
*Please use only VESA compatible mounting
– detailed table stand & wall mount datasheet available
to download at Advantech's website.
I/O Appearance
Camera embedded (Optional )
RFID Embedded
(optional)
75x75 VESA
Touch Panel &
LCD Display
Cable Cover
Micro SD slot
SIM slot
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Advantech USC-160 Series
Summary of Contents for Advantech USC-160 Series
- Page 1 Touch Panel & Front View LCD Display RFID Embedded (optional) Rear View Cable Cover *Please use only VESA compatible mounting – detailed table stand & wall mount datasheet available to download at Advantech’s website. Micro SD slot SIM slot 75x75 VESA...
- Page 2 Power On Computer Power On Computer 1. Connect an adaptor with input voltage rated 12V/3A for all USC-160 series. 2. Be sure to always handle power cords by holding plug ends only. Please refer to I/O ports section above to find the DC/AC inlet and power switch.
- Page 3 service personnel to verify that patient safety is not compromised. If your computer clock is unable to keep accurate time or the OS configuration resets to default, please check the battery. CAUTION! Do not replace the battery yourself. Please contact a qualified technician or your retailer.
- Page 4 only with same or equivalent type recommended by the manufacturer. Discard used VESA Mount & Mechanical Drawing & Opening Drawing batteries ac- cording to the manufacturer’s instructions.
Need help?
Do you have a question about the USC-160 Series and is the answer not in the manual?
Questions and answers