HMS Networks Intesis IN776MHI00 O000 Series User Manual page 32

Integration into KNX Systems
Description
Status_AC ambient temperature
Control_KNX ambient temperature
Status_FilterSign
Control_FilterReset
Status_Unit error code
Status_Compressor status
Control_RC Error Reset
Status_Thermo On/Off
Status_Expansion valve opening pulse status
Status_Decision frequency status
Status_Demand frequency status
Status_Heat Exchange low 1 temperature
Status_Heat Exchange low 2 temperature
Status_Heat Exchange low 3 temperature
Status_Consumption Yesterday Heat
Status_Consumption Today Heat
Status_Consumption Total Heat
Status_Consumption Yesterday Cool
Status_Consumption Today Cool
Status_Consumption Total Cool
NOTE
The default unit for the consumption signals is Wh, but you can set it in KWh instead. If so, the DPT
number changes from 13.010 to 13.013.
USER MANUAL Version 1.2.7
Mitsubishi Heavy Industries VRF with KNX, Serial and IP support
Function
Celsius: 0 .. 30 °C
Fahrenheit: 32 .. 86°F
°C / °F
0: Normal
1: Alarm
0: No reset
1: Reset
0: No Error
1 .. 255: Error
0: Off
1: On
0: No reset
1: Reset
0: Off
1: On
000 .. 999
0 .. 255 Hz
0 .. 255 Hz
°C / °F
°C / °F
°C / °F
Wh/KWh
Wh/KWh
Wh/KWh
Wh/KWh
Wh/KWh
Wh/KWh
DPT
9.001/9.027-DPT_Value_Temp (2byte)
9.001/9.027-DPT_Value_Temp (2byte)
1.005-DPT_Alarm (1bit)
1.015-DPT_Reset (1bit)
8.x (2 byte)
1.001-DPT_Switch (1bit)
1.015-DPT_Reset (1bit)
1.001-DPT_Switch (1bit)
8.x (2 byte)
14.033-DPT_Value_Frequency (4byte)
14.033-DPT_Value_Frequency (4byte)
9.001/9.027-DPT_Value_Temp (2byte)
9.001/9.027-DPT_Value_Temp (2byte)
9.001/9.027-DPT_Value_Temp (2byte)
13.010: active energy (Wh)
13.010: active energy (Wh)
13.010: active energy (Wh)
13.010: active energy (Wh)
13.010: active energy (Wh)
13.010: active energy (Wh)
Flags
R, T
Ri, W, U
R, T
Ri, W, U
R, T
R, T
Ri, W, U
R, T
R, T
R, T
R, T
R, T
R, T
R, T
R, T
R, T
R, T
R, T
R, T
R, T
Page 29 of 36