Table of Contents
Advertisement
QB-78F1026
This chapter explains the QB-78F1026 setup procedure.
Setup can be completed by performing installation setup in the order in which it appears in this chapter.
Perform setup along the lines of the following procedure.
See 2.1 Names and Functions of Hardware for clock positions.
Clock settings
Hardware settings are not required if the clock internally generated from the emulator is used.
If an oscillator must be mounted, see 2.2 Removal of Acrylic Board and 2.3 Clock Settings.
Software settings
See 2.4 Software Settings.
Mounting and connecting connectors
See 2.5 Mounting and Connecting Connectors.
Connecting QB-78F1026 to target system
See 2.6 Connecting QB-78F1026 to Target System.
Connecting USB interface cable and AC adapter
See 2.8 Connecting USB Interface Cable and AC Adapter.
Switching power on and off
See 2.9 Switching Power On and Off.
R20UT0290JJ0100 Rev. 1.00
Sep 30, 2010
CHAPTER 2 SETUP PROCEDURE
CHAPTER 2 SETUP PROCEDURE
Page 10 of 29
Advertisement
Table of Contents
