Configuring Logging Settings; Displaying Live Data; Configuring A Filter; Exporting Data - oventrop Regtronic KM IP Installation And Operating Instructions Manual

7.10 Configuring logging settings
In the Logging submenu, the logging interval and the logging type can be adjusted.
In order to configure the logging interval, proceed as follows:
1. In the Configuration main menu, select the Logging submenu.
2. Adjust the desired value in the Logging interval field.
3. Click Save configuration.
Note
The smaller the logging interval, the more memory capacity is used.
The logging type determines how the device behaves when its internal memory
capacity is fully used.
There are 2 different settings possible for the log mode configuration:
• Cyclic (factory setting): When the memory capacity is fully used, the oldest data
are overwritten.
• Linear: When the memory capacity is fully used, data logging stops.
In order to configure the logging type, proceed as follows:
1. In the Configuration main menu, select the Logging submenu.
2. In the Logging type dropdown menu, select the desired value.
3. Click Save configuration.

7.11 Displaying live data

In the live data display, the values of the controller connected are displayed and
refreshed automatically every 20 seconds. In order to display live data, proceed as
follows:
1. In the Data main menu, select the Live submenu.
2. Select the connected controller whose values are to be displayed.
7.12 Configuring a filter
The filter determines which data are to be displayed.
An existing filter can be edited or a new filter can be created.
In order to create a new filter, proceed as follows:
1. In the Data main menu, select the Filters submenu.
2. Click the symbol and select a filter number for the filter slot in the drop-
down menu.
3. Click Add.
4. In the General menu, enter the desired filter name in the Name field.
5. In the Preferred units menu, select the desired units for the display.
6. In the Fields menu, select the data for the display.
In order to enable public access to the filter, activate the menu item Public access
in the General menu.
In order to display the filter created in the Data submenu, activate the menu item
Show in menu bar.
Î Click Save configuration.
In order to edit an existing filter, proceed as follows:
1. In the Data main menu, select the Filters submenu.
2. Select the desired filter and click the symbol
A view of the data filter appears.
3. Edit the filter as described before.
4. Click Save configuration.

7.13 Exporting data

In order to copy logged data onto a computer, proceed as follows:
1. In the Data main menu , select the Download submenu.
2. In the File format dropdown menu, click the desired format.
For the download, further adjustments such as file format, filter, sieve interval, time
zone, range of data to be downloaded and language can be made.
3. Click Start download.
4. Save the file in a folder of choice.

7.14 Erasing data

In order to erase logged data, proceed as follows:
1. In the Data main menu, select the Erase submenu.
2. In order to erase all logged data, confirm the erase notification by clicking
Erase all.

7.15 Setting up Modbus / BACnet

The controller connected can be connected to a building management system. For
this purpose, the device offers Modbus or BACnet functionality.
.
33