Reliance electric GV3000 Instruction Manual page 63

Table 7.1 - Wiring Signal and Control I/O to the Terminal Strip (Continued)
Terminal
Number Description Parameters/Wiring Connections
Wiring the ResetInput
22 Digital Input 3 The following parameter must be set:
(Reset)
P.000: Control Source
16 ec
RESET
Terminal 22 On = Reset
Wiring the Stop/Start Inputs
23 Digital Input 2 The following parameter must be set:
(Stop)
24 Digital Input1 P.000: Control Source
(Start) P.025: Stop Type
16 23 16 24
STOP START
_|-
olo
Terminal 23 Off = Stop
Terminal 24 On Transition = Start
25 24 VDCIsolated Common
Wiring the Snubber Resistor
26 Snubber Resistor Braking Used with Snubber Resistor Braking Kit M/N 2DB4010.
Control Signal Refer to the kit's instruction manual for installation
instructions.
27 +24 VDC Isolated Common
7-14