Assumptions About The Audience; Taking Safety Precautions; Understanding Terms Usedin This Manual; If You Want To Know More - Reliance electric GV3000 Instruction Manual

1-2
1.2
1.3
Assumptions About the Audience
This manualis intended for qualified electrical personnel. It is task-oriented and is organized
according to a logical progression of steps to be followedto install and troubleshootthe drive.
Taking Safety Precautions
Dangers, warnings, and cautions are usedin this manualto point out potential problem areas. All
three types of precautions are enclosed in a boxto call attention to them.
A DANGER ALERTS A PERSON OF A CONDITION WHICH COULD RESULT IN SEVERE BODILY
INJURY OR LOSSOFLIFE.
WARNING
A WARNING ALERTS A PERSON OF A CONDITION WHICH COULD RESULT IN POTENTIAL BODILY
INJURY IF PROCEDURES ARE NOT FOLLOWED.
CAUTION: A caution alerts a person of a condition which could result in damage to, or destruction of the
equipment.
1.4
1.5
1.6
Understanding Terms Usedin this Manual
The following terms are defined according to the way they are used in this manual:
e GV3000 drives will typically be referenced by horsepower.If additional clarity is required, drive
model numberswill also be included.
e@ Parameters will be referenced either as parameter (P030) or Elapsed Time Meter Reset (P.030).
If You Want to Know More
Refer to the following related publications as necessary for more information:
e@ D2-3339 GV3000 A-C General Purpose (V/Hz) and Vector Duty Drive Software Start-Up and
Reference Manual
e@ D2-3291 Snubber Resistor Braking Kit
@ D2-3305 Motor Encoder Cable Kit
@ D2-3308 AutoMax Network Communication Board
e@ D2-3348 Control and Configuration Software (CS3000)
@ D2-3341 Remote Meter Interface
® D2-3342 Operator Interface Module
Getting Assistance from Reliance Electric
If you have any questions or problems with the products described in this instruction manual, contact
your local Reliance Electric sales office. For technical assistance, call 1-800-RELIANCE.